Bimini Tops

All bimini frames are custom bent in-house. This allows us to provide our customers with the highest quality one piece tubing frame bows (not some screwed together kit) that are nearly indestructible under normal use.

Here are five completed examples of bimini tops. The custom 3 panel walkthrough is a two bow, pontoon is a 4 bow and the bottom three pictures are 3 bow. All tops include zippered storage boot, premium “Sunbrella” fabric, chome or stainless hardware, and installation.

This red top is around 8 ft wide and six ft long. Installed price, $640.00.

Another 8 ft wide top. This one in blue Sunbrella. Same price. $705.00 installed and includes the storage boot.

3 bow premium Sunbrella with weather stripping is approx. 7 ft wide. Installed price with stand-up kit, $775.00





1997 Fountain 27
Sunbrella: Jockey Red
Fountains hull with the nearly perfect straight rub rail offers a very unique and stylish option for a travel cover.
This cover utilizes two ratchets, port/starboard midship, to secure a heavy duty nylon perimeter strap virtually eliminating all tie-down ropes! I did provide three evenly spaced nylon tie-down loops for insurance purposes.
Cool Boat….Cool Cover


1995 Baja 208 Islander.
perimeter ratchet strap, no tie-downs.
Nice and convenient.


 2007 Duroboat.
This has got to be one of the neatest aluminum boats I’ve seen lately. Port and Starboard consoles under the Tempotest yellow fabric. Wear areas reinforced with matching yellow Samson underneath.


Boat Covers and Mooring Covers.

The examples below were produced using a variety of premium marine fabrics.

Boats are measured and then material is cut for a custom fit.

Your choice of fabric and color. Fabric choices include: Sunbrella, Harbortime, Aqualon, dockside, Top Gun, etc. Your choice.

Only 100% UVR resistant Polyester thread is used for durability.

Nylon strap is used to reinforce all leading edges on mooring covers.Tie-downs include triple stiched nylon and draw string cord. I can use your existing adjustable mooring poles or sell them for $14.95 ea. Mooring poles are secured to the cover by snaps. The male post is provided beneath the rubber cap on the end of the pole and the female socket is located on a 4″ square, double layered marine vinyl patch that is sewn onto the underneath cover (not some inferior fabric sleeve to keep the pole in place).

2004 BAJA
Sunbrella fabric with matching spare tire cover.
Lead times vary depending on the season.

One to three weeks.

I can quote most jobs from a digital photograph or two.

1999 FORMULASunbrella fabric


 Fountain 32
Sunbrella, Jockey Red……..of course.
The pictures really fool you on the scale. Cockpit cover is nearly 18 feet long and 9 feet wide. Rolled edges reinforced with 1″ nylon webbing.


Chris Craft Triple Cockpit Barrel Back
I had the privilege of fabricating a waterline travel cover for this beautiful boat. This is hull #12 of 15. Chris Smith the grandson of the founder commissioned 15 of these boats built in Holland Michigan using the very same blueprints used in 1930. The fit and finish of this boat is nearly perfect in every detail.
Super deluxe “Odyssey” Soft side fabric, made by the same folks who make “Top Gun”. Reinforced with 13 wear patches on all chrome fittings. Perimeter rope with fancy velcro bow closure for the trailer stop.


Please disregard date stamp. Project completed 8/6/2010.
2010 Paddlewheel. Hydraulic propulsion, steering, paddlewheel lift.
Please note blue and red bimini trim embelishment.
24′ x 8′ beam Pontoon platform. Aqualon fabric. This is most likely the largest cover I have made. The tallest point is nearly 7′ and covers down to the deck and aft paddlewheel completely. “Apollo” wear patching everywhere for durability and longevity. Perimeter rope and nylon tie-downs under deck.


1995 Bass Tracker Pro
“Aqualon” Grey – just after a rain storm. Generous “Apollo” wear patching over trolling motor, hull corners, windshield, deck fittings, and pedestal seats.
Affordable embroidery provided by “BJ’s Emboidery”. Tracker logo also apllied to seperate engine cover.
This boat also treated to a new floor, carpet, and upholstery.


 1958 Trojan Sea Queen.
Check out the restoration of this classic on its own page.
Trojan Page
Note: please disregard incorrect date stamp. This boat was restored summer of 2008


 1949 Century Resorter.
Sunbrella down to the waterline.
Check out this cool boat on its own page.
Century Page


 2004 Glastron 240 Sport Curiser.
24′ 10″ cruiser with bow pulpit. Sunbrella


1996 Searay 230 Signiature Select. Beige matching Sunbrella cockpit and bow mooring covers.
1996 Bryant 195
Two toned Sunbrella. What a great match! Its hard to imagine this boat without this cover.


2006 Bayliner 185
Sunbrella all the way!


1994 Bayliner 1750 Capri.
New “Tempoest” fabric with “Teflon” made in Europe. Alfresco Collection
Red on black……….Sweet!


2001 Crownline 225
(with add-on custom swimplatform)
Ranger boats style travel cover! Heres one for my fellow canvas craftsman to try. Customer requested that his road cover be made like Ranger manufactures for their boats. All measurements had to be presise for this cover to work properly and look so good. Top Gun, one of the heaviest and longest lasting marine fabrics, was chosen for the job.
Notice there are no tye-down ropes securing the cover to the boat. However; I did provide the nylon tye-down loops in case this method is chosen to be used in the future. The primary method of securing this cover is achieved by way of a 1″ wide heavy nylon strap and geared ratchet. The perimeter nylon strap hugs the bottom of the rub rail and is ratcheted very tightly against the hull.


1988 Searay Seville. Exceptional fit and weathertite! “Harbortime” fabric.

View other pictures of this boats makeover.

Upholstery Page



1986 Searay Seville. Plans for this boat are to float all season under the sun.

Heavy “Seaside” will keep the weather out and provide good service for many seasons.

Custom 3 bow stand up bimini will keep its occupants nice and cool.

Nice and clean, classic Searay!




2004 – Princecraft

Here is a travel road cover made of heavy weight “Top Gun” fabric.

This boat is equipped with a bow mounted trolling motor. Please note how well the cover fits.




2001 – Skeeter SL210

Again, built to last with “Top Gun” fabric.

Another example with a bow mounted trolling motor.




1992 – Wellcraft Eclipse 233

Nice mooring covers for this cuddy express cruiser. I used Tempotest fabric from Europe coated with Teflon.



 Here are a couple examples of mooring covers. The boat on top is a 1996 Celebrity 180. The boat to the right is a 1999 Bayliner 175. And, the boat on the bottom is a 2000 Maxum 180.


2003 C-Dory

Sunbrella with weather stripping. Installed price is $470.00. including installing male snap posts.


2004 Bluewater

Two piece mooring covers made of premium Sunbrella fabric.

Install all male snap posts and fabricate custom covers for $775.00!!!


 Pontoon – 20 foot

Installed price is $785.00. This price does not include installing male snap posts. Please add $110.00 for this service on a pontoon.


Rinker – Captiva 212

Two piece mooring covers made of polymeric coated polyester “Aqualon” fabric. I really like this fabric. The material does not shrink and cut ends do not fray like many canvas products available.

Install all male snap posts and fabricate custom covers for $845.00!!!


SunTracker – Bass Buggy 18′

Premium Aqualon fabric. Trimmed in black Sunbrella and 1″ nylon webbing. Male snap posts were already installed on this boat.

Mooring cover with female snap buttons, $675.00. Custom matching bimini boot additional $90.00.




Crownline – 242

Premium Top Gun marine fabric. Trimmed in matching Sunbrella and 1″ nylon webbing. Male snap posts were already installed on this boat.

Mooring cover with female snap buttons, $595.00.




1991 Wellcraft – 232 Eclipse

Heavy weight Top Gun Fabric Again.




Larson – 206LXI

Another two piece mooring cover made of polymeric coated polyester “Aqualon” fabric.

Install all male snap posts, fabricate custom covers (notice the cockpit cover comes over the windshield) $745.00!!!




Caravelle BR1900

Two piece mooring cover made of polymeric coated polyester “Aqualon” fabric.

Install all male snap posts, fabricate custom covers $725.00!!!



1973 Starcraft aluminum

A very well cared for, all around,14′ fishing boat. Covered with premium Harbor Time marine fabric. Padded outboard wear patch. Corners and other wear areas reinforced with marine upholstery vinyl. This boat cover will last ten years with proper care.





 Truck Tonneau

Cover including button snaps only, custom fit. $330.00 for a 6′ bed or $370 for a 8′ bed.

Cover including button snaps and installing snap posts on bed . $385.00 for a 6′ bed or $420.00 for a 8′ bed.





 Seat Covers

Custom seat/helm covers to leave your boat moored for long periods without the hassle of using the large cover.

Please call for pricing.